Iowa Water Fowlers Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,447 Posts
Can anybody tell me if a 37 hp briggs vangaurd will bolt up to where a 23 hp vangaurd was on a go devel surface drive
You can make it work, but motor mounting plate and bolt holes will have to be modified. Tiller will have to be moved over. Think output shaft height and dia, would be an issue. Also gearing and insert if its not a long tail model. We did it on a 18HP Go devil LT crawdad model. Had to mod the motor side of universal joint to 35 hp. outout shaft Dia.. And reprop to a 9x9 prop.
 
1 - 2 of 2 Posts
Top